As a projector for the Homecinema sector, the Norxe P2 UHD is equipped with 5000 ANSI lumens, a WQXGA 2560 x 1600 resolution and a contrast of 4000:1. The runtime of the lamp in this model is estimated at 20000 hours before a replacement is necessary – mathematically sufficient for 27.4 years based on two hours of use per day. For maximum setup flexibility, the model supports optional interchangeable lenses, meaning the optics can be precisely matched to individual on-site requirements. Suitable distances can be determined using the Projection Calculator. A look at the light output reveals: The 5000 ANSI lumens are sufficient to illuminate an image width of up to 616 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 411 cm. For media input, video signals up to 1080P and 4K as well as 3D are supported. An additional 360° projection capability allows the device to be oriented at almost any angle. For convenient remote monitoring and administration, the projector is equipped with a classic RJ45 network socket.
Display Type
1 x DLP Chip WQXGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
5000
Screen
1667 Lux (200 cm Screen width)
Contrast
4000:1 full on/off
4000:1 full on/off
Black Level
1,2500 min. Lumen
0,417 min. Lumen
Offset
-
Resolution
WQXGA 2560 x 1600
4.096.000 Pixel UHD (4K2K) 3840 x 2160 compressed
Stationary | Permanent installation in the training room and meeting room as well as the conference room. Wide screen width or rooms with plenty of light (over 200 lumens).
Light Source
-
Light Life
20000 h. bis 50% Helligkeit
Operating Costs
-
Calculated brightness quality The screen width may also be larger. Perfect
Lux:
1667 Lux
Contrast:
4000:1
Candela pro m²:
531 cd/m²
Foot-Lamberts:
155 fL
•
Focus
Powered
Zoom
Powered
Objective
Throw Ratio
optional
Audio
Nein
Connections
1x HDMI 2.0 in
2x DVI in (Dual Link DVI 120Hz)
2x DisplayPort 1.2
2x BNC (sync/trigger)
1x Mini DIN
1x S-Video in
1x USB in
1x RJ45 in