| Customer review |
|
 |
|
Brief Introduction
Beta 2.5 |
A brief introduction to the ZU500TST -W: The Optoma stationary 3D laser DLP projector offers 5000 Ansi lumens, a contrast of 300000:1 and a WUXGA 1920 x 1200 resolution. The lifespan of the laser is 20000 hours, which is equivalent to over 13.7 years at 4 hours per day. The integrated lens shift gives freedom when positioning the projector. The projector is equipped with a microphone jack plug and 10W speakers, so no additional speakers are required for presentations or training courses. The projector can illuminate images up to 718 cm wide thanks to its 5000 Ansi lumens. The projector can create rooms with residual light with a smaller image width, we recommend a maximum of 479 cm. A smartphone with MHL connection can be connected directly to the MHL/HDMI port and transmit a 1080p / 60 Hz image mirroring (screen mirroring) while the smartphone is being charged at the same time. Playing 1080P and 3D is also no problem for the projector, which can even project Blu-rays onto the ceiling thanks to 360° projection. At 28 decibels, the projector is very quiet compared to other projectors. The projector was launched in 2018 and is no longer sold by the manufacturer.
|
| Display Type |
DLP Chip
WUXGA 16/9 Ti Digital Light Processing Chip
|
| Ansi-Lumen |
Projector |
5000 |
Screen |
2222 Lux (200 cm Screen width) |
| Contrast |
300000:1 full on/off |
300000:1 full on/off 
|
| Black Level |
0,0167 min. Lumen |
0,007 min. Lumen |
| Lens shift |
Vert.: +70% --30% Hori.: +/-10%
|
| Resolution |
WUXGA 1920 x 1200
2.304.000 Pixel |
| Video Modes |
Pal, SECAM, NTSC, HDTV 720p, 1080i, 1080p, 3D, EDTV 480p, 576p |
| 3D Compatibility |
Frame-Packing (Full HD 3D) | Side-by-Side | Top-and-Bottom
Frame Sequential (3D Ready) |
| Application |
Stationary | Permanent installation in the training room and meeting room as well as the conference room.
Wide screen width or rooms with plenty of light (over 200 lumens). |
| Light Source |
Laser
|
|
| Light Life |
20000 h. |
| Operating Costs |
0,00 € Laser
|
|
158 cm (no Zoom)
|
 |
|
Lux: |
2222 Lux |
|
Room light max.: |
444 Lux |
|
Candela pro m²: |
706 cd/m² |
|
Foot-Lamberts: |
206 fL |
|
 |
| 79 cm
|
|
Screen width: 200 cm Gain:1 |
|
|
| Focus |
Manual |
| Zoom |
No Zoom |
| Objective |
F=2,49 f=11,66mm |
| Throw Ratio |
0,79:1 |
| Audio |
2 x 10W |
| Connections |
2 x HDMI in (1 x MHL)
D-sub 15pin in und out
Microphone
Mini Jack Audio in und out
USB in
RS232C Din 9 pin in
RJ45 in
HdBaseT
3D Syncout
Wired Remote
12V Out
 |
| Ceiling Mounting |
Yes, is possible. |
| Power |
480 / 320W in Eco Mode |
| Size WxHxD |
405 x 129 x 387 mm (15,9"x5,1"x15,2") 20,22 L/dm³
|
| Operating Noise |
28dB |
Key: 91 cm
Shift: 79 cm |
Key: 91 cm
Shift: 20 cm |
| Key: 91 cm
Shift: 20 cm |
| |
|
|
| Weight |
11,30 kg / 24,25 lbs. |
| Keystone |
Vert.: +/-30°
Hori.: +/-30°
|
| Illumination |
- |
| Frequenz |
H-sync: 15,37-91,1 kHz
V-sync: 24 - 85 Hz
|
| Foot-Lamberts |
206 fL
/ max. 718 cm screen width |
| Candela m² |
706 cd/m² |
| Features |
 Real Full HD 3D
Full HD 1080P compatible
Lens shift Funktion
Eco Mode
Kensington Slot
360° installable
PJLink™
Lan network compatible.
Short-throw projector
Crestron®-Software compatible.
-W White model
|
|
über HDMI MHL |
In Comparison
The Optoma ZU500TST -W compared to others not current "Stationary" projectors. |
| Ansi-Lumen: |
|
49 |
Weight: |
|
98 |
| Contrast: |
|
6 |
dB: |
|
97 |
| Black level: |
|
100 |
Power cons.: |
|
95 |
| Picture Total Points: | 52 |
Projector Total Points: | 97 |
|
| Popularity Top 100 |
|
| Points: |
|
21 |
| Ranking: |
1278 (From: 2514) |
|
|
|
|
|
| Status |
2018 Discontinued (EOL) // Last update of the data: 2024-10-02
Created: 2018-08-15 19:45:48
|
| Data |
 Product Sheet english
Product Sheet english HC
User Manual english (6.9 MB)
     
|
Optoma Website
